Create a new page (Insert new default page).ensure the 3d view is set to “top” (view -> standard views -> top, hotkey “2” or click on the top face of the view cube).It is in fast development at the time of writing which is why no detailed tutorial is provided how to use it. The tech draw workbench is the main workbench for creating dimensioned drawings in freecad. Molex_Micro-Fit_3.0_43045-1215_2x06_P3.00mm_Vertical.kicad_mod (5.2 KB)įor convenience here a simplified drawing from the datasheet (removed unnecessary stuff to reduce clutter for this tutorial) with highlighted dimensions.ġ881×1165 140 KB Create dimensioned drawing to compare against datasheet Using the Tech Draw workbench In this tutorial we will be checking the following footprint from the official library of version 5. An alternative is that a specific dimension is given as an equation (example (pincount - 1) * pin pitch to describe the distance between the outermost pins) In such documents dimensions that differ between the described parts are typically marked with a letter in the drawing and specified in a table. A typical example is the datasheet for connectors available for many pin counts. Some datasheets define dimensions for a full series of components. Sometimes these dimensions are in a separate document. To check a footprint you will need to use the dimensions given in the datasheet. Reading the Datasheets Suggested Footprint
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |